ATRV Curved Rafter

Curved Roof Rafters are available in a Maxi curve and a Mini curve and are widely considered as the best quality roof rafter available. Suitable for most caravan and RV rollout awnings including Dometic, Carefree and our own Sunburst and Coolabah awnings, the CRR is used to keep the vinyl of your awning from sagging, allow water to run off (preventing pooling), as well as keeping the fabric tight and reducing wind flap.

Maxi curve rafter (123-125mm) is suitable for longer awnings on motorhomes or full height caravans.

Mini curve rafter (95-98mm) is suitable for awnings of all lengths on pop-top caravans as well as for shorter awnings on motorhomes and full height caravans.

The Curved Roof Rafter is also available with a tensioning arm, known as a Curved Tension Rafter.  The Curved Tension Rafter is a standard Curved Roof Rafter with a tension arm fitted and is ideally suited to awnings 18′ and over.  The lever action of the rafter allows it to exert pressure and help prevent longer awning roller tubes from bowing.

Exclusive design curve and shape, the Curved Roof Rafter (CRR) was developed to help overcome wind flap in the fabric of the awning and to prevent water from pooling.

FEATURES AND BENEFITS:

• Maxi Suits awnings of 2100mm to 2400mm
• Maxi Curve: 125mm
• This MAXI version has 45mm more radius on the arc than the MINI version. The higher curve makes is ideally suited to full height caravans and motorhomes
• Mini Suits awnings of 2100mm to 2400mm
• Mini Curve: 95-98mm
• This MINI version has 45mm less radius on the arc than the MAXI version.
• It consists of two white powder coated sections that slide together to make the perfect length CRR for your awning
• A knurled knob holds the two sections firmly together while the stainless steel hook end anchors the AFK to your van
• Stainless steel spigot end slots nearly into your awning roller tube