Enerdrive The Heart Led Wanderers

Enerdrive The Heart Led Wanderers Kit. Dane and Nadine of Heart Led Wanderers are well-known influencers who love to roam this island of ours, and they’re big fans of Enerdrive’s power systems. They say that having a good power system allows them to live full time on the road – which is great for their young family. Their lifestyle of working full-time from the van plus home schooling puts extra demands on their power consumptions. With the Enerdrive Heart Led Wanderers power system kit, they’re able to charge their computers and devices, run air-conditioning and appliances, enabling total self-sufficiency.

The kit includes everything they need to power their lifestyle, including the Simarine with its Quadro Shunt Module 4 X 50A Input Current that can precisely monitor all the large current charge inputs and loads remotely from the Simarine phone app or supplied Simarine Pico monitor on the Esystem board. So, if you’re looking for a power solution that will let you enjoy a nomadic lifestyle too, consider the Enerdrive Heart Led Wanderers Power System Kit.

FEATURES AND BENEFITS:

• Designed by and exclusive to Suncoast Caravan Service.
• ENC-KIT-PARALLEL-95-01 Parallel Battery Cable Kit 95mm2 x 300mm POS & NEG Suit BT150 & BT300.
• EPL-300BT-12V-G2 B-TEC 300amp / 12v LiFePO4 Battery Gen2. The Enerdrive EPL-300BT-12V-G2 ePower B-TEC 300amp / 12v LiFePO4 Battery BT G2 battery incorporates wireless Battery Monitoring Technology. The battery is also equipped with a new design internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.
• ESYS-F Enerdrive ESYS-F ESystem 40/40 AC/DC 2K Inc Simarine. The eSYSTEM’s are all pre-wired by Enerdrive where possible to keep the them simple to install. All eSYSTEMS have a full wiring diagram showing each circuit and where to connect your loads, battery and inverter cabling. All items are mounted on a 12mm Black plastic (water & rot resistant) board for simple mounting into the application.
• EN43530 Enerdrive MPPT Solar Controller w/Display – 30Amp 12/24V. The Enerdrive MPPT Solar Controllers adopt the advanced MPPT control algorithm, it can minimize the maximum power point loss rate and loss time, quickly track the maximum power point (MPP) of the PV array and obtain the maximum energy from solar array under any conditions; and it can increase the ratio of energy utilization in the solar system by 20%-30% compared with PWM charging method.
• SI-SCQ50 Simarine Quadro Shunt Module 4 X 50A Input Current. SCQ50 is an innovative shunt module for monitoring individual consumers and generators with 4 x 50A Current Sensors and for 12v and 24v Systems.
• EN-RCB40 Enerdrive 40amp Surface Mount Breakers 5/16 Stud. Enerdrive 40amp Surface Mount Breakers 5/16 Stud. Thermal circuit breakers provide medium duty circuit protection for 25 to 150 Amp loads when switching and circuit protection are both required.

WHAT IS INCLUDED:

• 1 x ENC-KIT-PARALLEL-95-01 Parallel Battery Cable Kit 95mm2 x 300mm POS & NEG Suit BT150 & BT300
• 2 x EPL-300BT-12V-G2 B-TEC 300amp / 12v LiFePO4 Battery Gen2
• 1 x ESYS-F Enerdrive ESYS-F ESystem 40/40 AC/DC 2K Inc Simarine
• 2 x EN43530 Enerdrive MPPT Solar Controller w/Display – 30Amp 12/24V
• 1 x SI-SCQ50 Simarine Quad Shunt Mod 4 X 50A Input Current
• 2 x EN-RCB40 Enerdrive 40amp Surface Mount Breakers 5/16 Stud

Not what you are looking for? Check out our full range of Enerdrive Kits here.