Black Jack BJTJ-1001 Electric Trailer Jack with Clamp & Wiring Harness Kit

Black Jack BJTJ-1001 Electric Trailer Jack with Clamp & Wiring Harness Kit. The Black Jack™ Trailer Jack is the simplest, quietest and most advanced electric jack on the market today. Easy to operate RAISE/LOWER control switch, 1600. kg lift capacity. 

Hugely popular in the USA, the Black Jack™ now comes complete with the all-weather cover, and the Black Jack Clamp™ (Australian Patent Pending) allowing uses the ability to easily bolted to the Caravan or Trailer A-Frame.

For easier and faster deployment or retraction the Black Jack™ includes the Black Jack™ Folding Foot providing no more bending down to adjust the foot extension height position. Also included is the Black Jack™ Foot Pad giving improved stability on soft or unstable surfaces.

For easy installation, all Black Jacks are pre-wired to an Andersen plug. An installation wiring harness is also available to purchase separately. This harness includes a pre wired Andersen plug at one end and an inline fuse and battery terminals at the other end. The 5 meters of positive and negative Number 8 wires are encased in a protective cover.

FEATURES AND BENEFITS:

• Black Jack Trailer Jack Key Features:
  • 1600 kg lifting capacity, more than enough muscle
  • Robust 58 mm outer post built for the toughest conditions (normal jockey wheels are only 48mm)
  • Massive 560 mm stroke that will lift the caravan clear of the tow vehicle hitch in any conditions
  • Built in level indicator to easily adjust the caravan level after you unhitch
  • Removable foot pad extension for travelling
  • Tough powder coated finish
  • Pre wired to an Andersen plug
  • Emergency crank handle included as an emergency back up
  • Built in night light for operating after hours
  • Free all weather cover to keep the rain out
  • Free installation kit included, easy DIY Installation (with BJTJ – 1001)
• Black Jack Clamp Key Features:
  • 6 different chassis bolt hole positions so it fits any Caravan or trailer A-Frame in Australia (6 inch, 5 inch, 4 inch or 3 inch)
  • Multiple top hole positions so the Black Jack can be installed facing the front, the side or the rear of the Caravan or trailer. Your choice!
  • Panel recess so you can install over the top of existing wire fittings maximizing the options of where to install on the A-Frame.
  • Safety chain insert hole so you can hang safety chains on the Black Jack Clamp.
  • Upper support and a lower support brackets designed to eliminate any lateral movement that may be caused by uneven surfaces.
  • Easy bolt installation. No additional modifications, welding or tools are required.
  • Tough powder coated finish
  • Australian Patent Pending (No. 2020902039) Registered Australian Design
  • Assembled in Australia supporting Australian Jobs
• Black Jack Folding Foot Key Features:
  • Diameter Foot Plate: 15.2cm x 11.5cm
  • Height: 25cm
  • Weight: 2.2kg
  • Maximum Load: 1,000kg
• Black Jack Trailer Jack Foot Pad Key Features:
  • Diameter: 20cm
  • Height: 2.5cm
  • Weight: 800grams
  • Maximum Load: 1,000kg
• Black Jack DIY Installation Wiring Harness Key Features:
  • 5 m Battery Cable (7.92mm2) (8 B&S)
  • Fuse Box
  • 30 amp Inline Fuse
  • 2 x 10-6 Fuse Lug Terminals
  • Cable Crimp Connector
  • 10-8 Battery Lug Terminal
  • Heat Shrink

SPECIFICATIONS:

• 12 volt 28 amp DC power plugs directly to 12 volt battery
• Total weight including Black Jack Clamp 17 kg

WHAT IS INCLUDED:

• 1 x Black Jack BJTJ-1001 Electric Trailer Jack with Clamp & Wiring Harness Kit
• Kit Includes;
  • 1x Black Jack Electric Trailer Jack
  • 1x Black Jack Clamp Patented (part number BJTJ-BKT)
  • 1x Black Jack Folding Foot (Part No. BJTJ-FF)
  • 1x Black Jack Foot Pad (Part No. BJTJ-FP)
  • 1x Black Jack All Weather Cover (part number BJTJ-Cover)
  • 1x Black Jack Installation Wiring Harness (part number BJTJ-HAR)

IMPORTANT INFORMATION:

Not what you are looking for? Check out our full range of Jacks & Parts here.