B.E.S.T. 322H Inline Water Filter

B.E.S.T. 322H Inline Water Filter. This B.E.S.T. Inline, model 322H (H is for on the Hose) is fitted with plastic ‘click on’ hose fittings (compatible with other brands like Gardena, Pope, Neta, etc). This allows your filter to be installed in the main hose line running to your RV, which is used to fill your tanks or for when directly connected to the water supply while camping. The Inline is fitted in that main hose line, which eliminates the need for alterations in your vehicle’s plumbing. DIY installation takes 2 minutes!

FEATURES AND BENEFITS:

• TIP – The slower water flows through all water filters, the better the contaminant removal will be. If you’ve got the time, do a slow fill of your tanks.
• Only B.E.S.T. has the “SilverSafe” B.E.S.T. is… Bacteria Eliminating “SilverSafe” Treatment
• Australia’s B.E.S.T. Inline Water Filter was designed, hand assembled and made here in Australia!
• CHEMICAL/DIRT REMOVAL (TASTE & ODOUR): Our 322HB B.E.S.T. Inline Water Filter contains a combination of quality carbons (chosen to suit Australian water conditions) to remove a broad spectrum of contaminants.
• DUAL MEMBRANES: 5 micron and 1 micron membranes are located at both ends of the B.E.S.T. Inlines to ensure fine filtration.
• “SilverSafe” TECHNOLOGY: Two full beds of “SilverSafe” are included to kill harmful bacteria and keep your B.E.S.T. Inline bacteria free during extended storage periods.
• LONG LIFE: Due to lack of bacteria within the B.E.S.T. Inlines, this means there is no reason for ‘regular interval’ replacement. The reason all other water filters recommend a replacement time period (ie. every 6 or 12 months) is that the bacteria levels can increase to an unhealthy level. With B.E.S.T., we have eliminated this problem, so you replace ours when the carbon’s life has expired – not when the bacteria sets in!
• REVERSIBLE / BACK-FLUSHABLE: The inside of the B.E.S.T. Inline water filter is a mirror-reverse, allowing it to be back-flushed to eliminate the build-up of contaminants on the membrane.
• SEALED: No cartridges to replace.
• COMPACT: Our filter was designed by us to be compact, portable and portable for the travelling community.

SPECIFICATIONS:

• Dimensions (without packaging): 30cm x 9cm x 9cm
• Connection: 3/4″ bsp female threads fitted with Plastic 12mm garden hose ‘click’ connector.
• Micron Rating: The B.E.S.T. Inlines have dual membranes on each end – a 5 micron, followed by a 1 micron.
• Flow Rate: 0 – 15 Litres per minute (dependant upon incoming pressure)
• Max Pressure: Complies with Australian Standards – Holds 2100 kPa over a 15 minute period
• Min. Pump Pressure Required: Min. 35 psi or higher
• Min. / Max. Temperature: 1°C to 40°C

WHAT IS INCLUDED:

• 1 x B.E.S.T. 322H Inline Water Filter

IMPORTANT INFORMATION:

Not what you are looking for? Check out our full range of Water Filters here.