Enerdrive EN1110S ePower 1000W/12V PSW Inverter

With Enerdrive EN1110S ePower 1000W/12V PSW Inverter ‘s state of the art, easy to use design, this 1000W inverter will offer you reliable service for providing AC power and 5V USB power for your home, boat, caravan, 4WD or commercial vehicle.

The Enerdrive ePOWER 1000W Inverter can run many AC powered appliances when you need AC power anywhere. The 5V USB power can charge many USB powered devices.

FEATURES AND BENEFITS:

• Australian GPO Outlets
• True sine wave output is ideal for operating motor loads, and to reduce stress on surge protection circuitry, meaning potentially longer equipment life
• Audio alarm with warning/error codes to alert user to check inverter condition before unit shutdown
• Automatic shutdown protects overload, over temperature and low/high battery conditions
• High surge capacity for products that require more power to start (2 x constant)
• High efficiency conversion of battery available power to AC power
• Mounting brackets for permanent installation
• Heavy duty DC battery stud connectors
• Includes 5V USB port

SPECIFICATIONS:

• 177mm (W) x 325mm (L) x 90mm (H)
• 2.9kg

WHAT IS INCLUDED:

• 1 x Enerdrive EN1110S ePower 1000W/12V PSW Inverter
• 6 Meter Remote On / Off Switch Included with both 1000W and 2000W Inverter Models

Not what you are looking for? Check out our full range of Inverters here.

IMPORTANT INFORMATION:

For safe and optimum performance, the Enerdrive ePOWER Inverter must be used properly.

WARNING: Enerdrive recommends that all wiring be done by a certified technician or electrician to ensure adherence to the applicable electrical safety wiring regulations and installation codes. Failure to follow these instructions can damage the unit and could also result in personal injury or loss of life.

CAUTION: Before beginning your Enerdrive ePOWER Inverter installation, please consider the following:

• The Enerdrive ePOWER Inverter base unit should be used or stored in an indoor area away from direct sunlight, heat, moisture or conductive contaminants.
• When placing the unit, allow a minimum of 75mm of space around the unit for optimal ventilation.