Enerdrive K-RV-80-01 RV 80 Plus Board With Monitor

Description

[vc_section sticky_allow=”{“xl“:““}” el_id=”enerdrive_desc”][vc_row el_id=”desc_parent”][vc_column][vc_column_text]Enerdrive K-RV-80-01 RV 80 Plus Board With Monitor is designed, constructed and pre-wired by Enerdrive. Enerdrive’s RV Installation Kits for 4WD Canopies, Caravans, Camper Trailers, Commercial Work Vehicles and more. The Enerdrive K-RV-80-01 RV 80 Plus Board With Monitor is pre-wired by Enerdrive where possible to keep the kits simple to install. All RV boards have a full wiring diagram showing each circuit and where to connect your loads, battery and inverter cabling. All items are mounted on a 12mm Black plastic (water & rot resistant) board for simple mounting into your RV.[/vc_column_text][/vc_column][/vc_row][vc_row el_id=”included_parent”][vc_column][wpb_riode_heading heading_title=”V0hBVCUyMElTJTIwSU5DTFVERUQlM0E=” html_tag=”h3″ decoration=”simple” link_align=”link-left” title_typography=”{“family“:“Roboto Condensed“,“variant“:“700“,“size“:“18PX“,“line_height“:““,“letter_spacing“:““,“text_transform“:“none“}” css=”.vc_custom_1659055167601{margin-top: 0px !important;margin-bottom: 20px !important;border-bottom-width: 1px !important;border-bottom-color: #dddddd !important;border-bottom-style: solid !important;}” title_color=”#083e66″][vc_tta_accordion title_tag=”h3″ style=”modern” color=”white” c_icon=”chevron” active_section=”” no_fill=”true” collapsible_all=”true”][vc_tta_section title=”Enerdrive EN3DC40+ DC2DC 40+amp Battery Charger / MPPT Regulator” tab_id=”1658979010196-2c21b684-c04a9e87-8c08″][vc_row_inner content_placement=”middle”][vc_column_inner][vc_column_text]The Enerdrive ePOWER DC2DC+ Battery Charger is a fully automatic multistage, multi-input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in-built Maximum Power Point Tracking (MPPT) Solar Controller. With two inputs available, the main/house battery will be charged from either the engine while underway, or via the solar panels when stationary. The process to choose either engine or solar is fully automatic and both functions are controlled from within the unit itself without the need for external relays.[/vc_column_text][wpb_riode_heading heading_title=”RkVBVFVSRVMlMjBBTkQlMjBCRU5FRklUUyUzQQ==” html_tag=”h4″ decoration=”simple” link_align=”link-left” title_typography=”{“family“:“Roboto Condensed“,“variant“:“700“,“size“:“16PX“,“line_height“:““,“letter_spacing“:““,“text_transform“:“none“}” css=”.vc_custom_1659070214492{margin-top: 20px !important;border-bottom-width: 1px !important;padding-bottom: 10px !important;border-bottom-color: #dddddd !important;border-bottom-style: solid !important;}” title_color=”#083e66″][vc_column_text]

• Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output
• DC M6 screw terminals that will allow for large battery cable connection between all sources
• A dedicated Maximum Power Point (MPPT) solar regulator
• The same battery algorithms as included in our AC mains ePOWER battery charger
• GEL, AGM, Flooded, Lithium and the ability to create a full custom profile
• Vehicle input allows for either 12 or 24v and a maximum solar input of 45V/800W
• 40A output up to 40+°C with thermo controlled fan cooling
• Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage
• Temperature sensor included in charger for more accurate battery charging
• Dimensions 242mm(H) x 172mm(W) x 74mm(D)
• Weight 1.85kg

[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Enerdrive EN31240 ePOWER 12V-40A Multi-Bank Battery Charger” tab_id=”1659050774588-f21e1eee-074e9e87-8c08″][vc_row_inner content_placement=”middle”][vc_column_inner][vc_column_text]The Enerdrive ePOWER 40A Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently.[/vc_column_text][wpb_riode_heading heading_title=”RkVBVFVSRVMlMjBBTkQlMjBCRU5FRklUUyUzQQ==” html_tag=”h4″ decoration=”simple” link_align=”link-left” title_typography=”{“family“:“Roboto Condensed“,“variant“:“700“,“size“:“22PX“,“line_height“:““,“letter_spacing“:““,“text_transform“:“none“}” css=”.vc_custom_1659070234793{margin-top: 20px !important;border-bottom-width: 1px !important;padding-bottom: 10px !important;border-bottom-color: #dddddd !important;border-bottom-style: solid !important;}”][vc_column_text]

• Multistage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks
• Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three
• Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3
• Current Control: User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator)
• Smart Charging: The ePOWER battery charger will regulate its output based on the loads connected to your battery banks
• Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz
• Silent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours
• Temperature Sensor: Battery temperature sensor included with 3-meter cable
• Dimensions 295mm(W) x 206mm(L) x 89mm(H)
• Weight 2.6kg

[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Enerdrive EN55050 ePRO Plus Battery Monitor” tab_id=”1659050773136-2deef20e-0ea79e87-8c08″][vc_row_inner content_placement=”middle”][vc_column_inner][vc_column_text]Enerdrive Battery Monitors use high performance measuring circuits, along with complex software algorithms to display the exact state of the remaining battery capacity. The ePRO Battery Monitor uses a clear back lit LCD Display and an intuitive user interface, all parameters can be recalled with just a button press. A second battery input is also provided to monitor voltage on a second battery. The ePRO and ePRO-HV battery monitors are equipped with an internal programmable alarm relay, to start a generator when needed or to turn off devices when the battery voltage exceeds programmable boundaries.[/vc_column_text][wpb_riode_heading heading_title=”RkVBVFVSRVMlMjBBTkQlMjBCRU5FRklUUyUzQQ==” html_tag=”h4″ decoration=”simple” link_align=”link-left” title_typography=”{“family“:“Roboto Condensed“,“variant“:“700“,“size“:“22PX“,“line_height“:““,“letter_spacing“:““,“text_transform“:“none“}” css=”.vc_custom_1659066042836{margin-top: 20px !important;border-bottom-width: 1px !important;padding-bottom: 10px !important;border-bottom-color: #dddddd !important;border-bottom-style: solid !important;}”][vc_column_text]

• 12v to 24v range battery monitor including 500amp shunt
• Provides critical information about the status of your battery bank
• Displays voltage, current, consumed amp hours and remaining battery capacity
• Two battery inputs
• Auto sensing battery voltage inputs
• Large backlit LCD Display
• Quick nut mounting construction
• Programmable alarm relay
• Shunt selection capability enables flexible system integration
• Splash proof front panel
• 500 Amp shunt included E and e-mark certified
• Displays time remaining
• Communication/expansion port
• Stores a wide range of history events in internal memory
• Advanced programmable alarm relay
• Battery temperature sensor input
• Dimensions 100mm(L) x 100mm(W) x 24mm(H)
• Weight 70g

[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][/vc_tta_accordion][/vc_column][/vc_row][vc_row el_id=”fnb_parent”][vc_column][wpb_riode_heading heading_title=”RkVBVFVSRVMlMjBBTkQlMjBCRU5FRklUUyUzQQ==” html_tag=”h3″ decoration=”simple” link_align=”link-left” title_typography=”{“family“:“Roboto Condensed“,“variant“:“700“,“size“:“18PX“,“line_height“:““,“letter_spacing“:““,“text_transform“:“none“}” css=”.vc_custom_1659066193971{border-bottom-width: 1px !important;border-bottom-color: #dddddd !important;border-bottom-style: solid !important;}” title_color=”#083e66″][vc_column_text]

• Enerdrive K-RV-80-01 RV 80 Plus Board With Monitor includes:
• ePOWER DC2DC 40+ Charger including MPPT Solar Regulator (EN3DC40+)
• ePOWER AC 40Amp 230v Charger (EN31240)
• ePRO Plus Battery Monitor (EN55050)
• ePOWER AC Charger 50A Output Fuse Connection
• ePOWER DC2DC 60A Output Fuse Connection
• 50A Load Output Fuse Connection
• 12mm Black Plastic Mounting Board. Water & Rot Resistance
• Dimensions 480mm(L) x 400mm(W) x 100mm(D)

[/vc_column_text][/vc_column][/vc_row][vc_row el_id=”important_parent”][vc_column][wpb_riode_heading heading_title=”SU1QT1JUQU5UJTIwSU5GT1JNQVRJT04lM0E=” html_tag=”h3″ decoration=”simple” link_align=”link-left” title_typography=”{“family“:“Roboto Condensed“,“variant“:“700“,“size“:“18PX“,“line_height“:““,“letter_spacing“:““,“text_transform“:“none“}” css=”.vc_custom_1659066200808{border-bottom-width: 1px !important;border-bottom-color: #dddddd !important;border-bottom-style: solid !important;}” title_color=”#083e66″][vc_column_text css=”.vc_custom_1664325686441{padding-top: 10px !important;}”]Not what you are looking for? Check out our full range of Battery Management & Power Systems here.

Please ensure that the Enerdrive K-RV-80-01 RV 80 Plus Board With Monitor is installed by a Licensed Technician and compliant with Australian Standards, as improper installation can lead to serious injury or death.

PLEASE NOTE: Freight forwarders/Shipping consider Lithium Batteries ‘Dangerous Goods’. As a result, shipping times may be longer than usual. Pleaser allow additional days for delivery.

For more information about the RV Installation Kits, check out this video.[/vc_column_text][/vc_column][/vc_row][/vc_section]