Enerdrive ESYS-E ESYSTEM 40/40 AC/DC, EPRO+

Description

[vc_section sticky_allow=”{“xl“:““}” el_id=”enerdrive_desc”][vc_row el_id=”desc_parent”][vc_column][vc_column_text]Enerdrive ESYS-E ESYSTEM 40/40 AC/DC, EPRO+ Installation Kits for 4WD Canopies, Caravans, Camper Trailers, Commercial Work Vehicles and more. The eSYSTEM’s are all pre-wired by Enerdrive where possible to keep them simple to install. All eSYSTEM’s have a full wiring diagram showing each circuit and where to connect your loads, battery and inverter cabling. All items are mounted on a 12mm Black plastic (water & rot resistant) board for simple mounting into the application. Enerdrive also have you covered from a service and support angle with the eSYSTEM DIY Installation kits. Designed, constructed and pre-wired by Enerdrive, we know exactly the layout and wiring of your kit so any fault finding, or support can be given quickly and concisely.[/vc_column_text][/vc_column][/vc_row][vc_row el_id=”included_parent”][vc_column][wpb_riode_heading heading_title=”V0hBVCUyMElTJTIwSU5DTFVERUQlM0E=” html_tag=”h3″ decoration=”simple” link_align=”link-left” title_typography=”{“family“:“Roboto Condensed“,“variant“:“700“,“size“:“18PX“,“line_height“:““,“letter_spacing“:““,“text_transform“:“none“}” css=”.vc_custom_1659055167601{margin-top: 0px !important;margin-bottom: 20px !important;border-bottom-width: 1px !important;border-bottom-color: #dddddd !important;border-bottom-style: solid !important;}” title_color=”#083e66″][vc_tta_accordion title_tag=”h3″ style=”modern” color=”white” c_icon=”chevron” active_section=”” no_fill=”true” collapsible_all=”true”][vc_tta_section title=”Enerdrive EN31260 ePOWER 12V-60A Multi-Bank Battery Charger” tab_id=”1658979010196-2c21b684-c04a3656-9445″][vc_row_inner content_placement=”middle”][vc_column_inner][vc_column_text]Enerdrive ESYS-E ESYSTEM 40/40 AC/DC, EPRO+ includes the Enerdrive ePOWER 40A Battery Charger. The Enerdrive ePOWER 40A Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently.[/vc_column_text][wpb_riode_heading heading_title=”RkVBVFVSRVMlMjBBTkQlMjBCRU5FRklUUyUzQQ==” html_tag=”h4″ decoration=”simple” link_align=”link-left” title_typography=”{“family“:“Roboto Condensed“,“variant“:“700“,“size“:“16PX“,“line_height“:““,“letter_spacing“:““,“text_transform“:“none“}” css=”.vc_custom_1659070214492{margin-top: 20px !important;border-bottom-width: 1px !important;padding-bottom: 10px !important;border-bottom-color: #dddddd !important;border-bottom-style: solid !important;}” title_color=”#083e66″][vc_column_text]

• Multistage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks
• Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three
• Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3
• Current Control: User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator)
• Smart Charging: The ePOWER battery charger will regulate its output based on the loads connected to your battery banks
• Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz
• LED Display: Easy to use “set and select” menu along with scrolling charger status
• Silent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours
• Temperature Sensor: Battery temperature sensor included with 3-meter cable
• 295mm(L) x 206mm(W) x 86mm(H)
• Weight 2.6kg

[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Enerdrive EN3DC40+ DC2DC 40+amp Battery Charger / MPPT Regulator” tab_id=”1659050774588-f21e1eee-074e3656-9445″][vc_row_inner content_placement=”middle”][vc_column_inner][vc_column_text]Enerdrive ESYS-E ESYSTEM 40/40 AC/DC, EPRO+ includes the Enerdrive ePOWER DC2DC+ Battery Charger. The Enerdrive ePOWER DC2DC+ Battery Charger is a fully automatic multistage, multi-input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in-built Maximum Power Point Tracking (MPPT) Solar Controller. With two inputs available, the main/house battery will be charged from either the engine while underway, or via the solar panels when stationary. The process to choose either engine or solar is fully automatic and both functions are controlled from within the unit itself without the need for external relays.[/vc_column_text][wpb_riode_heading heading_title=”RkVBVFVSRVMlMjBBTkQlMjBCRU5FRklUUyUzQQ==” html_tag=”h4″ decoration=”simple” link_align=”link-left” title_typography=”{“family“:“Roboto Condensed“,“variant“:“700“,“size“:“22PX“,“line_height“:““,“letter_spacing“:““,“text_transform“:“none“}” css=”.vc_custom_1659070234793{margin-top: 20px !important;border-bottom-width: 1px !important;padding-bottom: 10px !important;border-bottom-color: #dddddd !important;border-bottom-style: solid !important;}”][vc_column_text]

• Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output
• DC M6 screw terminals that will allow for large battery cable connection between all sources
• A dedicated Maximum Power Point (MPPT) solar regulator
• The same battery algorithms as included in our AC mains ePOWER battery charger
• GEL, AGM, Flooded, Lithium and the ability to create a full custom profile
• Vehicle input allows for either 12 or 24v and a maximum solar input of 45V/800W
• 40A output up to 40+°C with thermo controlled fan cooling
• Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage
• Temperature sensor included in charger for more accurate battery charging
• 242mm(H) x 172mm(W) x 74mm(D)
• 1.85kg

[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Morningstar TriStar SR-TS-45 45amp PWM Reg” tab_id=”1659050773136-2deef20e-0ea73656-9445″][vc_row_inner content_placement=”middle”][vc_column_inner][vc_column_text]The Morningstar TriStar is a three-function controller that provides reliable solar battery charging, load control or diversion regulation.[/vc_column_text][wpb_riode_heading heading_title=”RkVBVFVSRVMlMjBBTkQlMjBCRU5FRklUUyUzQQ==” html_tag=”h4″ decoration=”simple” link_align=”link-left” title_typography=”{“family“:“Roboto Condensed“,“variant“:“700“,“size“:“22PX“,“line_height“:““,“letter_spacing“:““,“text_transform“:“none“}” css=”.vc_custom_1659066042836{margin-top: 20px !important;border-bottom-width: 1px !important;padding-bottom: 10px !important;border-bottom-color: #dddddd !important;border-bottom-style: solid !important;}”][vc_column_text]

• Highest Reliability – Large heat sink and conservative design enables operating at full ratings to 45°C
• More Information – Optional meter displays extensive system and controller information, automatic self-test and reset. Displays in 5 languages
• Communications Capability – RS-232 connects to a personal computer for custom settings, data logging and remote monitoring and control
• Fully Adjustable – DIP switch provides user with choice of 7 digital presets. Additional custom settings via RS-232
• Extensive Electronic Protections – Fully protected against reverse polarity, short circuit, over current, high temperature and over voltage
• 260mm(W) x 127mm(L) x 71mm(H)
• 1.60kg

[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Enerdrive EN55050 ePRO Plus Battery Monitor” tab_id=”1659050771920-c449cabb-1f1a3656-9445″][vc_row_inner content_placement=”middle”][vc_column_inner][vc_column_text]The ePRO Plus is Enerdrive’s latest generation, highly advanced battery monitor. It consists of an intelligent shunt and a remote control and display unit. The shunt has a grid optimized footprint for perfect integration with our DC modular products. This advanced battery monitor shows the true state of charge of your battery system. It also offers many additional features to optimally supervise your battery system and control external equipment. The ePRO Plus is compatible with lead based and Lithium batteries (LiFePO4). The ePRO PLUS can monitor up to three battery banks. The inputs for battery bank 2 and 3 can also be configured for other purposes, like mid-point voltage measurement, keyswitch input, setup lock or backlight control. The ePRO PLUS battery monitor can measure DC currents up to 600Amps (500Amp continuous) and voltages up to 70Vdc. So any lead- or lithium based battery from 12V up to 48V can be monitored.[/vc_column_text][wpb_riode_heading heading_title=”RkVBVFVSRVMlMjBBTkQlMjBCRU5FRklUUyUzQQ==” html_tag=”h4″ decoration=”simple” link_align=”link-left” title_typography=”{“family“:“Roboto Condensed“,“variant“:“700“,“size“:“22PX“,“line_height“:““,“letter_spacing“:““,“text_transform“:“none“}” css=”.vc_custom_1659066076605{margin-top: 20px !important;border-bottom-width: 1px !important;padding-bottom: 10px !important;border-bottom-color: #dddddd !important;border-bottom-style: solid !important;}”][vc_column_text]

• Latest generation, innovative battery monitor
• Shows the true state of charge of your battery system
• Unit consists of intelligent shunt, remote control and display unit
• ePRO Plus is compatible with lead based and lithium batteries
• The ePRO Plus can monitor up to three battery banks
• The ePRO Plus battery monitor can measure DC currents up to 600Amps (500Amp continuous) and voltages up to 70Vdc
• Dimensions 100mm(L) x 100mm(W) x 24mm(H)
• Weight 70g

[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][/vc_tta_accordion][/vc_column][/vc_row][vc_row el_id=”fnb_parent”][vc_column][wpb_riode_heading heading_title=”RkVBVFVSRVMlMjBBTkQlMjBCRU5FRklUUyUzQQ==” html_tag=”h3″ decoration=”simple” link_align=”link-left” title_typography=”{“family“:“Roboto Condensed“,“variant“:“700“,“size“:“18PX“,“line_height“:““,“letter_spacing“:““,“text_transform“:“none“}” css=”.vc_custom_1659066193971{border-bottom-width: 1px !important;border-bottom-color: #dddddd !important;border-bottom-style: solid !important;}” title_color=”#083e66″][vc_column_text]

• Enerdrive ESYS-E ESYSTEM 40/40 AC/DC, EPRO+ includes:
• ePOWER AC 60Amp 230v Charger (EN31260)
• ePOWER DC2DC 40+ Charger Vehicle/Solar (EN3DC40+)
• Morningstar Tristar PWM-45A Solar Controller (TS-45)
• ePRO Plus 500A Battery Monitor with Remote Display (EN55050)
• 3 Stud Main Negative Bus Bar
• 40A Low Battery Cutout
• Main System Circuit Breaker 200A
• Inverter Circuit Breaker 200A
• Solar Input Circuit Breaker 40A
• Solar Input Positive Circuit Breaker 60A
• ePOWER DC2DC 60A Output Fuse Connection
• ePOWER AC Charger 70A Output Fuse Connection
• 2 x 30A Load Output Fuse Connections
• 12mm Black Plastic Mounting Board Water & Rot Resistance
• 600mm(L) x 490mm(W) x 100mm(D)

[/vc_column_text][/vc_column][/vc_row][vc_row el_id=”important_parent”][vc_column][wpb_riode_heading heading_title=”SU1QT1JUQU5UJTIwSU5GT1JNQVRJT04lM0E=” html_tag=”h3″ decoration=”simple” link_align=”link-left” title_typography=”{“family“:“Roboto Condensed“,“variant“:“700“,“size“:“18PX“,“line_height“:““,“letter_spacing“:““,“text_transform“:“none“}” css=”.vc_custom_1659066200808{border-bottom-width: 1px !important;border-bottom-color: #dddddd !important;border-bottom-style: solid !important;}” title_color=”#083e66″][vc_column_text css=”.vc_custom_1664327401524{padding-top: 10px !important;}”]

[/vc_column_text][/vc_column][/vc_row][/vc_section]