Enerdrive EPL-300BT-12V-G2 ePower B-TEC 300amp / 12v LiFePO4 Battery BT

The Enerdrive EPL-300BT-12V-G2 ePower B-TEC 300amp / 12v LiFePO4 Battery BT G2 battery incorporates wireless Battery Monitoring Technology.

By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;

• Battery Capacity
• Battery Voltage
• Battery Current (Amps)
• Battery State of Charge (SOC)
• Battery State of Health (SOH)
• Battery Status
• Individual Cell Voltage
• Battery Temperature
• Battery Cycles
• Battery Alarms
• Battery Event Information
• Battery Management System
• Size & Weight Savings
• Lithium v AGM Capacities

The battery is also equipped with a new design internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.

FEATURES AND BENEFITS:

• Enerdrive EPL-300BT-12V-G2 ePower B-TEC 300amp / 12v LiFePO4 Battery BT
• Available in 12v 100Ah, 125Ah, 200Ah capacities and 24v & 36v 100Ah, the ePOWER B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity
• The ePOWER B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative
• Smart Phone Monitoring System
• Max Discharge Current 250A (15mins) – 200A Continuous
• Max Charge Current 190A (30mins)
• Can be connected in parallel (up to 4 Batteries)
• Built In Flat Battery Reset Switch
• Communication Ports (RS485) for future integration

SPECIFICATIONS:

• 300Ah Lithium = 480Ah AGM
• 519mm (L) x 273mm (W) x 222mm (H)
• 37.7kg
• New design Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery

WHAT IS INCLUDED:

• 1 x Enerdrive EPL-300BT-12V-G2 ePower B-TEC 300amp / 12v LiFePO4 Battery BT

IMPORTANT INFORMATION:

If you are requiring a battery system larger than ePOWER B-TEC battery, please look at the Enerdrive Pro Series Power Pack Systems which can offer multiple parallel and series connections with Active Cell Balancing Protection across the entire pack.
Please ensure that this product is installed by a Licensed Technician and compliant with Australian Standards, as improper installation can lead to serious injury or death.
PLEASE NOTE: Freight forwarders/Shipping consider Lithium Batteries ‘Dangerous Goods’. As a result, shipping times may be longer than usual. Pleaser allow additional days for delivery. Not what you are looking for? Check out our full range HERE